Screw air compressor high temperature alarm stop how to do?

Note!
Summer air compressor high temperature alarm stop, self-check self-correction three-step method:
1, check whether the unit is short of oil.
The judging standard is to observe the lubricating oil on the oil and gas barrel and the liquid level indicator of the oil level gauge when the air compressor is running. The indication should not be below the minimum scale. The solution is to add oil. If the lubricating oil exceeds the use time, the new oil must be replaced immediately to avoid greater failure.
2. Check the heat sink and cooling fan.
Air compressor radiator surface should be clean, no dust and oil. In daily use, the operation and use specifications for regularly blowing dust on the surface of the radiator should be observed. The cooling fan should operate well at normal speed. If it is repaired by yourself, please pay attention to whether the fan rotates correctly.
3. Check whether the ambient temperature is too high.
The ambient temperature should not be higher than 45 degrees Celsius. Check whether the operating environment of the air compressor is too low and crowded, the high temperature gas is not smooth, and whether there are other high temperature equipment around the air compressor. In addition, if conditions permit, air compressor can be installed separately into the exhaust pipe.